Product
Description
 The ASR series Storage server balances what the End-User and System vendor needs to deliver the best solution, provides a classy design, highest flexibility, easy to install and maintain, more storage in limited space and ultimate drive and data protection in this limited space.
Each unit has up to 4 dual row hot-swappable cooling fans and with multiple temperature sensors at the hot points.
The ASR -104 backplane with built in power supply-to-drive isolation power management circuitry that allows control over voltage and current fluctuations to protect the data and critical hard disk drives, making the ESR104 uniquely suitable for today highly demanding system workloads.
Features and Benefits
- Supports SSI EEB 3.5, CEB 1.1 or AMD Dual Opteron compliant server boards
- Power MOSFET and pre-charge circuit for surge current protection on hard drive and backplane
- Horizontal backplane design to allow maximum airflow for system cooling
- Fan failure, over-temperature detection
- 3 years warranty on power suppl
- Other High Quality Components are backed by life time warranty
Specification
| Dimensions |
7"(H) x 19"(W) x 28"(D) |
| Front Access Connector |
2 X USB ports, 1 X DB9 port |
| Front Access switch |
ower On/Off, Reset, Alarm Reset |
| Front Panel Indicators |
Power On, HDD Activity, PSU failure, Fan failure, Over heat warning, LANs |
| Hot swap drive indicators |
Power On, HDD Activity, HDD failure |
| Power Supply |
650W 2+1 Hot-swap redundant power supply |
| Power Supply Options |
1350W Redundant |
| System Board |
Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant |
| Drive Bay |
Internal slim FDD x 1 |
Internal slim CD x 1 |
Internal slim 2.5" x 2 ( 3 maximum ) |
Hotswap Bay x 20 |
|
| Data Backplane |
| Serial ATA PTP |
| Serial ATA Multilane |
| Ultra 320 SCA |
| Serial Attached SCSI |
|
| Included Data cable |
Yes |
| Included slide rail |
Yes |
| System Monitoring |
Fan / over heat / power supply fault detection |
| Thermal |
Intel Validated Pass Xeon 3.6Ghz 800Mhz |
SATA backplane Specification
- A power MOSFET to provide disk spin-up control
- A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
- LED: Blue ON = HDD present; Blue Blanking = Drive activity; Red=Drive failed
- A 4x2 header for Drive activity and Drive failed LED signal input
- A 4x3 jumper with 4 jumper cap is added to select either disk activity LED is provide by the Host Bus Adapter or form HDD such as Western Digital or axtor Diamond Max X hard disk drive
- Single DC input to provide better cable management
- SATA data connector with latch to secure the SATA cable is not loose
- Options included Point-to-Point or Multilane data cable connection. 32pin 4-lane-to-1-lane connection available (special order only)
SCSI backplane Specification
- A power MOSFET to provide disk spin-up control
- A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
- LED: Blue ON = HDD present; Blue Blanking = Drive activity; Red=Drive failed
- A 4x2 header for Drive activity and Drive failed LED signal input
- Single DC input to provide better cable management
- Piano Switch for easy SCSI ID setting
- Two HD68 SCSI connectors for daisy chain if required
Technical Documentation
|
CONTACT
US