 |
World's fastest
iSCSI solution |
|
|
| ASR -208 |
Product
Description
The ASR -208 storage server chassis deliver technology that differentiates your company by helping you to create integrated competitive solutions that win.
Features and Benefits
- Supports SSI EEB 3.5, CEB 1.1 or AMD Dual Opteron compliant server boards
- Power MOSFET and pre-charge circuit for surge current protection on hard drive and backplane
- Horizontal backplane design to allow maximum airflow for system cooling
- Included SGS approved slide rail
- 3 years warranty on power supply
- Other High Quality Components are backed by life time warranty
Specification
| Dimensions |
3.5"(H) x 19"(W) x 28"(D) |
| Front Access Connector |
2 X USB ports, 1 X DB9 port |
| Front Access switch |
ower On/Off, Reset, Alarm Reset |
| Front Panel Indicators |
Power On, HDD Activity, PSU failure, Fan failure, Over heat warning, LANs |
| Hot swap drive indicators |
Power On, HDD Activity, HDD failure |
| Power Supply |
550W 2+1 Hot-swap redundant power supply |
| Power Supply Options |
460W Fixed, 600W Fixed |
| System Board |
Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant |
| Drive Bay |
Internal slim FDD x 1 |
Internal slim CD x 1 |
Internal slim 2.5" x 2 ( 3 maximum ) |
Hotswap Bay x 8 |
|
| Data Backplane |
| Serial ATA PTP |
| Serial ATA Multilane |
| Ultra 320 SCA |
| Serial Attached SCSI |
|
| Included Data cable |
Yes |
| Included slide rail |
Yes |
| System Monitoring |
Fan / over heat / power supply fault detection |
| Thermal |
Intel Validated Pass Xeon 3.6Ghz 800Mhz |
SATA backplane Specification
- A power MOSFET to provide disk spin-up control
- A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
- LED: Blue ON = HDD present; Blue Blanking = Drive activity; Red=Drive failed
- A 4x2 header for Drive activity and Drive failed LED signal input
- A 4x3 jumper with 4 jumper cap is added to select either disk activity LED is provide by the Host Bus Adapter or form HDD such as Western Digital or axtor Diamond Max X hard disk drive
- Single DC input to provide better cable management
- SATA data connector with latch to secure the SATA cable is not loose
- Options included Point-to-Point or Multilane data cable connection. 32pin 4-lane-to-1-lane connection available (special order only)
SCSI backplane Specification
- A power MOSFET to provide disk spin-up control
- A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
- LED: Blue ON = HDD present; Blue Blanking = Drive activity; Red=Drive failed
- A 4x2 header for Drive activity and Drive failed LED signal input
- Single DC input to provide better cable management
- Piano Switch for easy SCSI ID setting
- Two HD68 SCSI connectors for daisy chain if required
Technical Documentation
| Technical Brochure |
ASR -208.PDF |
| User Manual |
ASR -208_manual_rev_1.PDF |
|
|
|